Plastic pipe circulating pressure impact test machine

plastic pipe circulating pressure impact test machine (water hammer test machine)
 Plastic pipe circulating pressure impact testing machine, also known as water hammer test machine for testing pipe, fittings or piping system in the case of alternating load fatigue and stress tolerance pulse peak stress. For a variety of hot and cold water piping system with rigid plastic pipes and flexible pipe systems, such as: PP-R, PP-H, PE, PEX and aluminum-plastic composite pipe and other pipes, pipe fittings.
This instrument uses a microcomputer hydraulic hose and fittings control, LED digital display, a simple, clear display, automatic alarm and other functions, various research institutes, national quality inspection institutions, large pipe manufacturers the necessary testing equipment.
Standard:
Standard GB/T18991, GB/T18992, GB/T18997, ISO10508, ISO15875, ASTM F1281, ASTM F1282, ASTM F1335, etc.
A) pressure cycles per minute, 30 ± 5 times (low voltage 0.1 ± 0.05Mpa, pressure 1.5 ± 0.05Mpa)
2) Timing accuracy: 1s
3) counting error: ± 1 ‰
4) Pressure accuracy: 0.05Mpa
5) the number of cycles set arbitrarily set :0-10000
6) Temperature range: 23 ± 2 ℃
7) Power supply: 380VAC/220VAC mix 50HZ 3kW

To warm the pipe full pipe pressure testing mach

To warm the pipe full pipe pressure equipment is used to test the coil resistance to internal pressure test, sufficient to avoid detection of resistance to internal pressure pipe brought incompleteness is an economical and practical, versatile, high degree of automation of the testing machine.
To warm the pipe full pipe pressure american hydraulic adapter controlled by a pressure micro part, auto-fill pressure relief and electric components, pressure micro control part adopts the microcomputer MCU control, equipped with a high-resolution, high-speed Σ-△ 16-bit analog-to-digital conversion chips, communications and computers always, you can also be individually controlled by the pressure unit, and according to stressful situations automatically fill pressure and automatic pressure relief. The machine can be achieved in a single step flushing, pressure and emptying tests. With leakage warning, burst identification, real-time monitoring, power holding pressure and other functions. All use the machine CE certification of electronic components, solenoid valves, Germany, Denmark sensor; reliable long-term operation and high stability, grape purple border, decent, dignified and beautiful.

analyze future CNC laser cutting machine industry focus direction

analyze future CNC laser cutting machine industry focus direction
At present, the international representative of the laser cutting manufacturer mainly German Trumpf, Bystronic, Italy Prima, etc., domestic Shenzhen Han, Wuhan Chutian

, Shanghai Unity Prima, etc., the market demand for laser cutting increasing year by year.

CNC laser cutting machine industry's future development, from the application of industry and enterprise point of view, focusing on the development of CNC laser cutting machine range will focus on the following aspects:

1, high-speed, precision CNC lathes, turning centers class and four-axis machine tool linked above. Mainly to meet the aerospace, aviation, instruments, meters, electronic letter

Information and teflon hose biological engineering industry needs.

2, high-speed, high-precision CNC milling and boring machine and high-speed, high-precision horizontal machining center. Mainly to meet the automotive engine cylinder head and aerospace, high-tech

Other industries large and complex structural support, housing, cabinet, light metals parts and precision parts machining requirements.

3, heavy, super heavy-duty CNC machine tools: CNC Boring and Milling Machine, Heavy Duty CNC gantry milling machine and machining center, CNC horizontal lathes and vertical heavy-duty vehicles

Bed, CNC hobbing and other heavy-duty, these products meet energy, aerospace, military, ship master manufacturing, heavy machinery manufacturing, large mold machining, turbine cylinder

Body parts processing industry needs.

4, CNC grinding machines: CNC ultra-precision grinding machines, high-speed precision grinding crankshaft and camshaft grinding machines, all kinds of high-precision high-speed dedicated grinder, etc., to meet the precision ultra-precision

Processing needs.

5, CNC metal forming machine tools (forging equipment): High-speed precision CNC sheet metal stamping equipment, laser cutting complex machine, CNC power spinning machines, mainly full

Foot automobile, motorcycle, electronic information industry, household appliances and other industries demand for efficient production batch sheet metal and automotive wheels and a variety of military industry walled, high-strength, high-precision back

Transition parts processing requirements. 6 CNC EDM categories: large-scale precision CNC EDM, CNC EDM wire cutting machine to go slow, precise holes electricity plus

Working machine tools, mainly to meet the large-scale and precision tooling, precision machining parts, cone-shaped holes or hole british hydraulic adapter and aerospace, aviation and other industries special needs.

7, CNC machine tools and production lines: flexible manufacturing automatic production line FMS / FMC) and a variety of special machine tools, such production lines for the automotive, appliance and other lines

Processing industry block, cylinder heads, gearbox housing, etc., and many varieties of variable volume housing box parts processing requirements.

Metric hose fittings hydraulic fittings standard editing

First, assemble the bite type pipe fittings
       ① most important aspects of pre-bite type pipe joint, direct impact on the reliability of the seal. Generally require a dedicated pre-filter. Small diameter joints can be pre-installed on the vise. In practice, as a parent with a joint, nut, ferrule can be pressed hydraulic testing machine onto the pipe. There are card sets straight pipe joints, card sets Straight turned head, sleeve tee pipe fittings and other types. I found that even in the same factory shipment, these types of connector body tapered hole depth is often not identical result is a leak, and this issue is often overlooked. The correct approach is to end what kind of pipe metric hydraulic hose fittings joint body, connecting the ends of the corresponding pre-installed with the same type of connector, which can maximize avoid leakage problems. ② pipe end should be flush. After sawing the pipe should be ground flush on the wheel and other tools, and deburring, cleaning with high-pressure air blowing before use. ③ When preinstalled, you should try to keep the coaxial tube and connector body, if the skew is too large will cause the tube seal failure. ④ preloaded force should not be too much of the inner edge of the card is just embedded in the tube wall sets, card sets should not have significant deformation. During hydraulic fittings pipeline connection, then the provisions of the tightening force assembly. ф6-1 card sets tightening force is 64-1 15n, 16фmmr 259n, ф18mm for 450n. If, at the pre-card sets severe deformation, will lose seal.

metric hose fittings prohibit adding sealant packing

It was sealed in order to achieve better results, put the card coated with sealant, sealant is the result into the hydraulic system, causing clogging damping hydraulic components and other failures. When the connecting pipe, the tube should have sufficient margin deformation,ferrule wire the tube is subjected to tensile force is avoided. When connecting pipe, it should be avoided by lateral force, lateral force caused Mifengbuyan over the General Assembly. When connecting piping, should disposable good, avoid multiple disassemble, otherwise it will seal performance deteriorated.
Card sets of pipe joints installed: metric hose fittings require the need for pickling pipes should be pickled;Multiseal metric hose fitting according to the required length by sawing or special pipe cutting machines and other equipment off the tube, and definitely not with a melting off (such as flame cutting) or wheel cutting; removing the pipe ends and outside round burr, metal chips and dirt; remove rust agents and dirt pipe joints; while also ensuring tube roundness; nut, ferrule has set into the tube, sleeve front edge (diameter end ) from the tube mouth at least 3mm, then the pipe into the connector body taper, top up to; slowly tighten the nut, turn the tube until it is not moving, then tighten the nut 2/3 to 4/3 laps; open inspection card sets whether to cut the pipe, the location is correct. Card sets are not allowed to move axially, can slightly rotate; re-tighten the nut after passing the examination.

reusable hose fitting is the body plays a flexible metal hose role

Plays the role of connecting joints; nets play a strengthened role of the shield. For different application requirements, the way interconnected between them varies: bellows, hydraulic valve manifold nets and welded joints in the form of three-part connection, called welding; mechanical clamping form connections, called mechanical clip-on; in addition, there are associated with the above two methods, called hybrid. reusable hose fitting, bellows habit called wave tube in the Americas (Corrugated Tube) or corrugated sac (Corrugated Box), commonly referred Interlock SAE Flange to as a metal capsule in Europe (Germany Metallbulgen, England Metal Bellows). This name comes from the old-fashioned manual operation of blast air bag, in our vulgar call it "Paper Tiger." It is a kind of horizontal corrugated thin cylindrical shell under axial tension or pressure, can elongate or shorten; If you give it a lateral force applied bending moment, you can get the corresponding axial plane displacement....

metric hose fittings prohibit adding sealant packing

It was sealed in order to achieve better results, put the card coated with sealant, sealant is the result into the hydraulic system, causing clogging damping hydraulic components and other failures. When the connecting pipe, the tube should have sufficient margin deformation, hydraulic manifold block the tube is subjected to tensile force is avoided. When connecting pipe, it should be avoided by lateral force, lateral force caused Mifengbuyan over the General Assembly. When connecting piping, bsp multiseal fitting should disposable good, avoid multiple disassemble, otherwise it will seal performance deteriorated.
Card sets of pipe joints installed: metric hose fittings require the need for pickling pipes should be pickled; reusable hydraulic hose fittings according to the required length by sawing or special pipe cutting machines and other equipment off the tube, and definitely not with a melting off (such as flame cutting) or wheel cutting; removing the pipe ends and outside round burr, metal chips and dirt; remove rust agents and dirt pipe joints; while also ensuring tube roundness; nut, ferrule has set into the tube, sleeve front edge (diameter end ) from the tube mouth at least 3mm, then the pipe into the connector body taper, top up to; slowly tighten the nut, turn the tube until it is not moving, then tighten the nut 2/3 to 4/3 laps; open inspection card sets whether to cut the pipe, the location is correct. Card sets are not allowed to move axially, can slightly rotate; re-tighten the nut after passing the examination.