Parher reusable hose fitting is your best choice

Parher reusable hose fittings are the only true sanitary reusable fittings for the food and beverage industry that meet the most stringent 3-A standards. Our patented technology allows customers to reuse the expensive stainless steel jic fittings when hose assemblies need to be replaced. This can significantly enhance the cost-effectiveness of an operation as fittings typically account for 40-80% of the hose assembly costs. Assemblies with Parher fittings can be reworked by any one of our authorized fabricating distributors.
Parker reusable fittings as a convenient, high-quality, affordable reusable joints, is your best choice.

pipe fittings are used in high-pressure hydraulic systems

Threads on hose fittings are tapered and rely on the stress generated by forcing the tapered threads of the male half of the hydraulic fitting into the female half or component port. Pipe threads are prone to leakage because they are torque-sensitive - over-tightening distorts the threads too much and creates a path for leakage around the threads. Moreover, pipe threads are prone to loosening when exposed to vibration and wide temperature variations - certainly no strangers to hydraulic systems.
Seepage around threads should be expected when reusable hose fittings are used in high-pressure hydraulic systems. Because pipe threads are tapered, repeated assembly and disassembly only aggravates the leakage problem by distorting threads, especially if a forged fitting is used in a cast-iron port. Thread sealant compound, a potential contaminant, is recommended for pipe fittings, which is still another reason why most designers consider them to be obsolete for use in hydraulic systems.

Parher can produce SAE hydraulic fittings

In order to accommodate our large inventory of hydraulic hose crimping machine, Parher can produce SAE hydraulic fittings that are of the world’s highest quality and precision. Our equipment ensures perfect repeatability and uniformity for our hydraulic hose coupling manufacturing.
Parher offers a number of fittings and hoses, to create our full line of hydraulic hose couplings. We have the capacity for tube bending, tube flaring, welding, crimping, fitting assembly, braising, and plating.
Parher Hydraulic hose fittings measure is mainly composed of an inner layer, the middle layer of liquid resistance, 2 or 4 or 6 layers of spiral steel wire reinforced layer, outer layer, inner layer with the pressure transmission medium, the protection of wire is not affected by erosion, outer layer protection wire is not damaged, the steel wire layer is the skeleton material enhancement.

hydraulic fittings are made in the China

reusable hydraulic hose fittings are the products that first Hydraulics on the map, and they continue to be our primary product. Our hydraulic fittings have been used by America's major manufacturers for decades, making us one of the largest hydraulic hose coupling suppliers in North America.
All of our metric hydraulic hose fittings are made in the China from Parher. We manufacture our hydraulic hose couplings in size 2 (1/8”) through size 40 (2-1/2”). Kurt Hydraulics is the most complete manufacturer of hydraulic hose couplings in the United States.

parallel (BSPP) and tapered (BSPT)

Great Britain BSPP (British Standard Pipe Parallel)
Bsp fitting is the most popular metric pipe thread end in Great Britain. These threads are either parallel (BSPP) or tapered (BSPT). The male BSPP will mate with a BSPP (parallel female or a female port). The male BSPT will mate with the BSPP female swivel. The male has straight threads and a 30-degree inverted seat. The BSPP female has straight threads and a 30-degree inverted seat. The female port has straight threads and spotface. The seal on the port is made with an "O" Ring or a soft metal washer on the male. The BSPP connector is similar to, but not interchangeable with our FPX. The thread pitch is different in most sizes, and the thread angle is 55-degrees instead of the 60-degree angle found on NPSM threads.
BSPT (British Standard Pipe Tapered)
The BSPT male will mate with a BSPT female and the BSPP female swivel. The BSPT male has tapered threads and a 30-degree inverted seat. The BSPT connector is similar to but not interchangeable with our MP. The thread pitch is different in most cases, and the thread angle is 55 degrees instead of the 60-degree angle found on NPTF threads. Neither the British parallel hydraulic hose or the British tapered pipe has true metric threads, although many people find these threads "foreign" and conclude they must be "metric."