british interlock hose fittings powder and other products

Hydraulic machine (aka: hydraulic press) hydraulic press is a use of hydrostatic pressure processing of metal, plastic, rubber, wood, powder and other products, machinery. It is commonly used in the british interlock hose fittings pressing process and press-forming process, such as: forging, stamping, cold extrusion, straightening, bending, flanging, sheet metal deep drawing, powder metallurgy, press-fit and so on.
Its principle is to use Pascal's law made the use of liquid pressure transmission machinery, many types. Of course, the purpose is also the root
It needs to be varied. In terms of types of liquid transfer pressure to points, there are hydraulic machines and hydraulic press two categories.
The total hydraulic pressure generated, commonly used in forging and stamping. Forging hydraulic press is divided into forging hydraulic free forging hydraulic press machine and the two kinds. Die forging hydraulic machine to use, and free forging hydraulic machines do not die. The first ten thousand tons of manufacture hydraulic press is free forging reusable hose fittings hydraulic machine. Hydraulic equipment repair and maintenance
1. Each boot load operation should be empty for 2-5 minutes, (plus a long winter can not be less than 30 minutes) before work.
2. One week later the use of new devices need to once all oil filtration and cleaning the tank, and then based on the load condition of the machine work 3-6 months to replace a fluid, cleaning a tank.
3. Since the system during use is strictly prohibited and will heat the fuel tank cap or filling hole open. After adjusting the pressure gauge switch should be closed (banned long open gauge switch, damaging the gauge). 5, is strictly prohibited outdoor use, flat seal metric hydraulic fittings measures should be rain

metal hydraulic hose and fittings

rely on electricity for molten metal hydraulic hose and fittings cutting, laser cutting is to rely on light molten metal to be cut, which
Two kinds of cutting methods to increase its cutting power as long as you can to improve their cutting speed. In cutting areas, in addition to the use of oxygen, gas cutting, the recent German research into
Rarely used. So it comes to cutting specifically refers to the former, and especially automatic cutting machine. In plasma cutting, according to the different types of plasma gas, air can be divided into
Cutter majority. In Japan, air plasma cutting machine cutting machine with automatic number of units sold in hydraulic quick coupling the market has been quite.

Plastic pipe circulating pressure impact test machine

Plastic pipe circulating pressure impact testing machine, also known as water hammer test machine for testing pipe, fittings or piping system in the case of alternating load fatigue and stress tolerance pulse peak stress. For a variety of hot and cold water piping system with rigid plastic pipes and flexible pipe systems, such as: PP-R, PP-H, PE, PEX and aluminum-plastic composite pipe and other pipes, pipe fittings.
This instrument uses a microcomputer hydraulic hose and fittings control, LED digital display, a simple, clear display, automatic alarm and other functions, various research institutes, national quality inspection institutions, large pipe manufacturers the necessary testing equipment.
Standard:
Standard GB/T18991, GB/T18992, hydraulics fittings GB/T18997, ISO10508, ISO15875, ASTM F1281, ASTM F1282, ASTM F1335, etc.
A) pressure cycles per minute, 30 ± 5 times (low voltage 0.1 ± 0.05Mpa, pressure 1.5 ± 0.05Mpa)
2) Timing accuracy: 1s
3) counting error: ± 1 ‰
4) Pressure accuracy: 0.05Mpa
5) the number of cycles set arbitrarily set :0-10000
6) Temperature range: 23 ± 2 ℃
7) Power supply: 380VAC/220VAC mix 50HZ 3kW

Installation and commissioning

Installation and commissioning
1 Handling: The machine should move the bar using a forklift or handling, the body is not allowed to tilt. Non- moving parts of the lift lock and scale .
2 Installation: The machine required level fixed on a solid foundation , and for ground handling .
3 oiling : open the case , adding 60 liters fuel tank 46 hydraulic oils .
4 Electrical connection : Connect the power cord to the machine specified power supply , observe the rotation jog motor , the motor rotation direction should be consistent with the pump requires .
5 Check Ruler : Ruler located reusable hose fittings cylinder front cover, is used to adjust the amount withheld shrink the size of the socket . Turn the adjusting the amount of shrinkage is reduced ; counterclockwise to adjust the amount of shrinkage increases. Ruler seat by spring force three screws on the pressure in the cylinder cover , hand pulling the ruler ( the direction perpendicular to the end face of the cylinder ) , the ruler should be flexible and leave the cylinder seat cover, after the release, by the spring force in the cylinder compression automatically on . Before you begin withholding , you should carefully check whether the scale stretching flexible . The ruler can not be fastened with screws on the fuel tank , otherwise it will damage the ruler.
6 pressure adjustment : machine system pressure is 20Mpa, relying on relief valve adjustment . Clockwise adjustment pressure, counterclockwise to adjust the pressure decreases.
7 speed adjustment mold : mold the pace , controlled by the shunt valve clockwise to adjust , mold speed, hydraulic hose clamps counter-clockwise to adjust , slow down the speed of the mold , but the mold too fast will make noise increases .

parher Hydraulic Hose Fittings Design Principles

Should be preferred Q / SY 015 015 pieces of pipe joints purchased varieties; When purchased items can not meet the specific connector fitting, in accordance with the standard requirements for the design. Should be preferred metric thread design; inch thread can also be designed. If the pipe joints port side of the connection parts of outsourcing, according to specifications of purchased parts port port-side design fittings oil. Material selection fittings fittings designed using high-quality carbon steel materials, chemical composition and mechanical properties, see GB / T 699. hydraulic hose machine Which has good plasticity, strength, excellent pressure resistance, is widely used in hydraulic systems. Preferred enterprise standard Q / SY 015 002 Appendix specifications. Port fittings and nozzle design port seal design port column end fittings designed using axial O-ring seal. Its port side groove type column as required. Optional fittings port threads and O-ring, and the corresponding groove dimensions and tolerances of the design requirements in Table A.1.

reusable hydraulic hose fittings are available

Parher reusable hydraulic fittings are strong, efficient, and easy to use. They come in two parts and are sold as assemblies. The stem has either a male or female pipe thread on one end. The other end has a tapered stem to fit inside the hose. The ferrule acts as a collar against which the hose is compressed when assembly is made. This connection fits firmly to the end of the hose, yet is removable and reusable on new hose when the old hose is discarded. Component parts are machined from solid brass rod and stainless steel.
reusable hydraulic hose fittings attach to the hose with a threaded connection and can easily be removed should the hose need to be repaired, unlike regular hose barb fittings. They are available in brass, electroless nickel, plated brass and stainless steel with male NPT, female NPSM and hose splicer’s options.

Parher reusable hose fitting is your best choice

Parher reusable hose fittings are the only true sanitary reusable fittings for the food and beverage industry that meet the most stringent 3-A standards. Our patented technology allows customers to reuse the expensive stainless steel jic fittings when hose assemblies need to be replaced. This can significantly enhance the cost-effectiveness of an operation as fittings typically account for 40-80% of the hose assembly costs. Assemblies with Parher fittings can be reworked by any one of our authorized fabricating distributors.
Parker reusable fittings as a convenient, high-quality, affordable reusable joints, is your best choice.

pipe fittings are used in high-pressure hydraulic systems

Threads on hose fittings are tapered and rely on the stress generated by forcing the tapered threads of the male half of the hydraulic fitting into the female half or component port. Pipe threads are prone to leakage because they are torque-sensitive - over-tightening distorts the threads too much and creates a path for leakage around the threads. Moreover, pipe threads are prone to loosening when exposed to vibration and wide temperature variations - certainly no strangers to hydraulic systems.
Seepage around threads should be expected when reusable hose fittings are used in high-pressure hydraulic systems. Because pipe threads are tapered, repeated assembly and disassembly only aggravates the leakage problem by distorting threads, especially if a forged fitting is used in a cast-iron port. Thread sealant compound, a potential contaminant, is recommended for pipe fittings, which is still another reason why most designers consider them to be obsolete for use in hydraulic systems.

Parher can produce SAE hydraulic fittings

In order to accommodate our large inventory of hydraulic hose crimping machine, Parher can produce SAE hydraulic fittings that are of the world’s highest quality and precision. Our equipment ensures perfect repeatability and uniformity for our hydraulic hose coupling manufacturing.
Parher offers a number of fittings and hoses, to create our full line of hydraulic hose couplings. We have the capacity for tube bending, tube flaring, welding, crimping, fitting assembly, braising, and plating.
Parher Hydraulic hose fittings measure is mainly composed of an inner layer, the middle layer of liquid resistance, 2 or 4 or 6 layers of spiral steel wire reinforced layer, outer layer, inner layer with the pressure transmission medium, the protection of wire is not affected by erosion, outer layer protection wire is not damaged, the steel wire layer is the skeleton material enhancement.

hydraulic fittings are made in the China

reusable hydraulic hose fittings are the products that first Hydraulics on the map, and they continue to be our primary product. Our hydraulic fittings have been used by America's major manufacturers for decades, making us one of the largest hydraulic hose coupling suppliers in North America.
All of our metric hydraulic hose fittings are made in the China from Parher. We manufacture our hydraulic hose couplings in size 2 (1/8”) through size 40 (2-1/2”). Kurt Hydraulics is the most complete manufacturer of hydraulic hose couplings in the United States.

parallel (BSPP) and tapered (BSPT)

Great Britain BSPP (British Standard Pipe Parallel)
Bsp fitting is the most popular metric pipe thread end in Great Britain. These threads are either parallel (BSPP) or tapered (BSPT). The male BSPP will mate with a BSPP (parallel female or a female port). The male BSPT will mate with the BSPP female swivel. The male has straight threads and a 30-degree inverted seat. The BSPP female has straight threads and a 30-degree inverted seat. The female port has straight threads and spotface. The seal on the port is made with an "O" Ring or a soft metal washer on the male. The BSPP connector is similar to, but not interchangeable with our FPX. The thread pitch is different in most sizes, and the thread angle is 55-degrees instead of the 60-degree angle found on NPSM threads.
BSPT (British Standard Pipe Tapered)
The BSPT male will mate with a BSPT female and the BSPP female swivel. The BSPT male has tapered threads and a 30-degree inverted seat. The BSPT connector is similar to but not interchangeable with our MP. The thread pitch is different in most cases, and the thread angle is 55 degrees instead of the 60-degree angle found on NPTF threads. Neither the British parallel hydraulic hose or the British tapered pipe has true metric threads, although many people find these threads "foreign" and conclude they must be "metric."

British Standard Pipe fittings and connectors

British Standard Pipe fittings and connectors are available in two versions, with parallel threads (BSPP) or tapered threads (BSPT).
The BSPT connection is similar to National Pipe Tapered Fuel (NPTF), except the thread pitches are different in most sizes. The thread form and outside diameters are close, but not the same. Sealing is accomplished by thread distortation.
Bsp fitting (BSPP and BSPT) fittings made from Type 316 Stainless Steel for maximum corrosion resistance. Stainless steel bsp multiseal fitting is recommended for marine applications, chemical processing and other harsh operating conditions.

As American Hose of customer service focus

As part of customer service focus, american fittings offers a series of technical references to assist current and prospective customers in the selection and decision making process for hose, hose fittings, hose accessories, and custom hose assembly. One of our key reference guides is our hose selection reference information.
Several key factors must be known and quantified before the appropriate hose can be chosen for any application. Fittings constructed of steel, brass, stainless steel and plastic with a variety of valves and components in various materials. Special hydraulic fittings manufacturers manufactured to customers specification in small or large quantities.

metric hose fittings are a highly respected quality product

metric pipe fittings are a highly respected quality product that provides a long product life cycle which saves a customer on replacement parts and labor. World Wide Metric offers the most comprehensive range of hydraulic fittings in carbon and stainless steel. include a wide range of materials: Steel metric hydraulic fittings, Stainless Steel metric fittings and Brass metric fittings. We specialize in all types and sizes, and carry an extensive stock of metric items. The range includes DIN metric compression, JIC flared, and BSP adaptors. Our steel fittings are plated to endure the harshest environments with a salt spray test exceeding 400 hours.

fittings for hydraulic hose Fittings

Parher offers hydraulic hose along with Pneumatic, Engine/Air Brake/Marine/Gas and Air Conditioning hose. Such as brass and stainless hose fittings include O-ring face seal, flare, straight thread, male pipe and metric designs, in both crimp and field-attachable styles . Along with Parher hose, all fittings have been tested and approved, meeting stringent industry standards worldwide such as NPTF, JIC, SAE, JIS and BSP.Best of all, our fittings bite through the cover and grip the wire reinforcement for maximum integrity.

Industrial hose fittings

Industrial hose fittings In addition to those manufacturers noted above, we also offer industrial hose fittings available in both inch and metric sizes from Camp bell Fittings, PT Couplings, Brass craft, and other manufacturers, in addition to the following:
 Valve and Coupling: Brass, nylon and polypro industrial fitting and adapters; and steel adapters, valves and quick coupling.
Holmbury: HPA series coupling line of hydraulic quick disconnects for high pressure pumps, cylinders, and other industrial applications.
Oetiker: A variety of ear type hose clamps that adapt to the expansion and contraction of industrial hose affected by thermodynamics or aging.
Reelcraft: A wide range of hose reels used for many applications to include stainless steel reels for low/medium pressure applications to rugged and durable large frame hose connector.

Products we offer in our hydraulic hose department include

Products we offer in our hydraulic hose department include:
1,High pressure hose assembly in both rubber/wire and stainless steel/Teflon construction.
2,Large selection of hose fittings so every hydraulic hose connection can be made safely and securely the first time.
3,Global Hydraulic hose fittings in both inch and metric systems—to include quick disconnects from Parher, Ltd.
4,Range of hydraulic hoses from Gates which can be used in a variety of applications to include but not limited to bulk loading of acids, paints, or other materials.

reusable hose fittings is used for emergency repairs

Reusable hose fittings is used for emergency repairs
These reusable hose fittings are an excellent choice for emergency repairs. Assembly can be accomplished with hand wrenches; there is no crimper required. Properly assembled, a hose with reusable fittings will meet all applicable SAE specifications.
CAUTION: Field-Attachable hose fittings must be used with the properly specified hose. Using field-attachable hose fittings with hose other than those they are intended may result in hose failure and possible serious injury.