Hose Fittings

Pipe fittings and pipe connecting tool between the connection point between elements can be removable and pipes. Serves as an indispensable role in the tube, it is the two hydraulic pipes constitute one of the main parts. Fittings for instruments, such as straight lines, connecting the form of socket weld or threaded connections. Mainly used for low pressure pipeline small caliber for assembly and disassembly of parts need frequent or as threaded pipe fittings with a final adjustment. Related products are excellent quick and easy collection of the structure should be adopted in the form of metal surface contact seal structure, structure gasket usually general pipeline for transporting water, oil, air, etc., using malleable iron material. In addition, when the choice is to consider the requirements and price and other factors.
Has a variety of types of pipe fittings, pipe fittings commonly used in general can be divided into two kinds of hardware fittings and hose fittings  If, pursuant to pipe fittings and pipe connections to points, hardware fittings have flared, ferrule and welded three, jic hose fittings are mainly withhold hose connector.
Hydraulic system connection pipes and fittings are also different, screwed into the end of the pipeline connecting thread is used. Taper thread by virtue of their vertebral body tighten and use PTFE sealing operations and other substances, mainly used in low-pressure hydraulic systems. Fine thread sealing effect is very good, often used for high-pressure system, but it requires the use of a combination of gaskets or O-rings to work against a closed end face, sometimes used copper washers, which are more suitable for comparison in connection wall thick pipes, which are mainly part of the joint body take over and nuts. In use, the connector body embedded targets, in conjunction with the previously mentioned gasket seal with a rubber seal between the connector body and takes over, sometimes using spherical sealing manner.
As the pipe joints belong to removable connecting elements, which meet the normal connection secure, sealing strong, reasonable size, small pressure loss, good process performance requirements, etc., but also must meet the requirements to facilitate disassembly . Therefore, do not watch a small a small pipe joint, because it exists only in order to prop up the entire hydraulic system