PTFE tube

1 Product description: PTFE commonly known as "plastic" is the world's best engineering plastics, it has excellent chemical stability, corrosion resistance, self lubrication viscosity, electrical insulation and anti-aging ability. In -60 ℃ ~ +250 ℃ temperature long-term use in chemical, mechanical, electronic, electrical, military, aerospace and other fields has been widely used. Products are F4 products, jacking pipes, extrusion tubes, rods, steel liner F4 equipment, pipes, elbows, tees, crosses, reducers, compensators, chlorine pipe, fluorine plastic containers, fluorine plastic pumps.

2 PTFE hose assembly PTFE banjo fitting tube is made of stainless steel woven wire withhold joints composition, commonly known as Teflon (PTFE tube).

PTFE tube covered with stainless steel wire:
First, the corrugated tube (HF01)

The tube through special processing methods, changes the pipe can not be bent around the features, it can be used to connect a low mechanical graphite, ceramic glass pipes, can be used as tankers, tanks, containers, or to the reactor, the discharge pipe , can be used to balance the pipe connections or misalignment due to weather or other causes displacement from the pipe, size change, or to eliminate high-frequency mechanical vibrations. On special occasions but also for tubular reactor or a heat exchanger and so on.

  HF01-1 common type bellows

Available DN10-150mm, length 20-20000mm of F4, PVDF bellows

Standard 1.5mm-2.2mm thickness

Fatigue cycles> = 10000
Use
1 user requirements and connectors according to the characteristics of rational use of quick connector models. (Including the working pressure, the nature of the medium used and the flow rate, temperature, corrosive and ambient temperature, quantity and form of connection piping, etc.)
(2) For users connected to one end of the rigid pipe welded directly should pay attention to the following points:
(1) with special hooks will be inserted rubber seals kit removed after soldering joints until completely cooled, then the seal into the plug kit.
(2) If there is no hose assembly special hooks, also can be filled with a damp cloth or cotton plug seals the inner diameter of jacket to prevent damage to the sealing temperature soldering.
(3) rapid non-conductive material such as a metal plate on the inside in order to avoid breaking current burn affect seal performance and fitting accuracy.
3 spherical ball joints (male) and cone (female) in the use and transport should be protected, not scratches or collision, so as not to affect even the closure of the connection.
4 Select the correct type and reasonably quick connector to install, is to improve the life of two extremely important factors.